The difference between the inner bay window and the outer bay window

Bay window is a decoration design that is often found in home decoration . Bay window design is a design element that can increase indoor lighting. Some friends also know that the bay window has the difference between the outer bay window and the inner bay window. However, some friends said that the bay window was good, and some friends said that the bay window was good. I will introduce the difference between these two bay windows today. Next, let the decoration home network Xiaobian introduce it to everyone.

The difference between the inner bay window and the outer bay window - the difference between the inner bay window and the outer bay window

1. The outer (floating) window must be a window that protrudes from the outer wall. It is different from the extension of the floor (floor) when it is designed and used, that is to say, the floor cannot be extended and is still called the outer window. The window sill of the outer window is only a part of the wall surface, and should have a certain height from the ground, while the floor-to-ceiling windows do not protrude from the outer wall. Usually, a water-proof platform with a width of 300mm and a height of 150mm is provided, and some floor-to-ceiling windows are directly located on the floor (floor). Above the surface.

2. The outer (floating) window is a building component, which does not calculate the area, and the floor-to-ceiling window counts the entire area.

3. The specification requires that the outer (floating) window, which is unfavorable to energy saving, should not be used in severe cold and cold areas, and there is no requirement for floor-to-ceiling windows.

4. The outer (floating) window top and bottom plates shall be insulated as required.

The same point: external (floating) windows and floor-to-ceiling windows should be equipped with safety protection facilities according to the specifications. The "House Design Code" (GB50096-1999) and the "General Rules for the Design of Civil Buildings" (GB50352-1995) have provisions for this.

What is the difference between the inner bay window and the outer bay window?

1, pay attention to the choice of countertops, must be environmentally friendly and non-toxic.

2, but for safety reasons, it is recommended that you do not open the bay window in the children's room, children with low window sills are easy to climb.

3, do not design the bay window as a dressing table, the light at the bay window is strong, one is not suitable for dressing, and many cosmetics are not suitable for exposure, otherwise it will easily deteriorate.

4. When setting the bay window, the insulation performance of the bay window must be guaranteed, otherwise it will not only cause energy waste, but also prone to condensation, drowning, mildew and other problems, affecting the normal use of the room.

5, if you want to put the computer, because the light is strong, you must match the thick curtains.

Internal bay window waterproofing method:

1. The inner bay window should be completely waterproof. Then we can use the screw cap and the nail hole of the mixed concrete screw to fill the polyurethane sealing paste. The fixed body is treated with a base layer, and the flashing plate of the joint between the window frame and the concrete body should be close to the main body of the concrete, and the base layer must also be specially treated.

2, the inner bay window leakage can also be installed to install the water blocking board, and the water blocking board should be installed inside the window frame of the inner bay window. If the home has installed the inner bay window, it can be repaired. The top of the inner bay window adopts a drip tank structure to prevent water from accumulating on the top of the inner bay window. The waterproof layer should be coated with a waterproof layer and seal the waterproof layer end of the wall joint.

Modification of the type of bay window:

1, the design of the inner bay window is also a lot, such as the inner bay window of your home in the long-term use, very old, looking very tired, can be transformed into a triangular window. It can make good use of the ductility of the window sill, and the space of the horns can be used ingeniously. In addition, several small storages can be designed to summarize some small objects.

2. There is also a design of the bay window in the semicircle. The shape of the bay window in the semicircle is also very close to the room type. The semicircular small table saves space and leaves enough passage for the kitchen. The semi-circular small dining table does not occupy space. It conforms to the shape of the window, and it can provide enough passage for the kitchen, and it is very close to the shape of the room. The dining table is very good with the window. Who can refuse to enjoy the first cup of coffee in the morning, reading and dining are very good.

The difference between the bay window and the bay window in the bay window is so much for everyone today. Especially for everyone, it is generally not to design the bay window in the children's room. The children are more active and the bay window is lower. It is especially dangerous for children to climb up, and everything must be safe. If you want to know more information, please continue to pay attention to the decoration home network.

More related wonderful reading:

Do you need curtains in the inner bay window? How to choose the inner window curtains?