Please Leave Us A Message
Privacy statement: Your privacy is very important to Us. Our company promises not to disclose your personal information to any external company with out your explicit permission.
Foreword
This standard was proposed by Dongguan Qinshang Optoelectronics Co., Ltd.
This standard is under the jurisdiction of the Guangdong Provincial Bureau of Quality and Technical Supervision.
This standard is mainly drafted by: Dongguan Qinshang Optoelectronics Co., Ltd., Tsinghua University, Dongguan Quality Measurement Supervision and Inspection Institute.
The main drafters of this standard: Li Xuliang, Luo Yi, Qian Keyuan, Zhu Bingzhong, Chen Daqing, Hu Zhengang, Liang Mingjuan, Liao Huaifei, Yao Zhihui, Zhang Zhihai, Deng Guoqiang, Dai Lianghui, Lei Zongping, Zhang Liqiang, Huang Daokang, Fu Baocheng, Ou Wen, Chen Haihan Yang Changjiang, Huang Geya, Weng Weidong, Guo Jiankun, Lao Yinghai.
1 Scope
This standard specifies the definition of LED (light-emitting diode) street light, product classification, model and naming, technical requirements, test methods, inspection rules and signs, instructions for use, packaging, transportation and storage requirements.
This standard is applicable to LED (light-emitting diode) street lamps for roads, street roads, tunnel lighting and other outdoor public places for lighting applications of DC power below 250 V or AC power supply below 1 000 V.
This standard is read in conjunction with the relevant sections of the relevant standards such as GB 7000.1.
2 Normative references
The terms in the following documents become the terms of this standard by reference to this standard. For dated references, all subsequent amendments (not including errata content) or revisions do not apply to this standard. However, parties to agreements based on this standard are encouraged to study whether to use the latest versions of these documents. For undated references, the latest edition applies to this standard.
GB/T 191 packaging storage and transportation pictorial signs (GB/T 191-2008, ISO 780:1997, MOD)
GB/T 2900.65 Electrotechnical terminology lighting (GB/T 2900.65-2004, IEC 60050-845: 1987, MOD)
GB 7000.1-2007 Luminaires Part 1: General requirements and tests (GB 7000.1-2007, IEC 60598-1:2003, IDT)
GB 7000.5—2005 Safety requirements for road and street lighting (GB 7000.5—2005, IEC 60598-1-3:2002, IDT)
General requirements for GB/T 9468 luminaire distribution photometric measurement
GB 17625.1 Electromagnetic compatibility Limit harmonic current emission limit (device input current per phase ≤ 16A)
GB/T 17626.5 Electromagnetic compatibility test and measurement technology Surge (impact) immunity test Electromagnetic compatibility test and measurement technology Surge (impact) immunity test (GB 17626.5-2008, IEC 61000-4-5:2005, IDT )
GB 17743 Limits and methods of measurement of radio disturbance characteristics for electrical lighting and similar equipment (GB 17743-2007, CISPR 15:2005, IDT)
GB 19510.1 Lamp control devices - Part 1: General requirements and safety requirements (GB 19510.1-2004, IEC 61347-1:2003, IDT)
CJJ 45—2006 Urban Road Lighting Design Standard
SJ/T 11364 Electronic Information Product Pollution Control Labeling Requirements
IEC 60838-2-2 Miscellaneous lamp holders - Part 2-2 Particular requirements for connectors for LED modules
IEC 61347-2-13 Lamp control devices Part 2-13 LED module control devices Safety requirements
IEC 62031 LED modules for general lighting - Safety requirements
Photobiosafety of IEC 62471 lamp and lamp systems
3 Terms and definitions
The terms and definitions established in GB/T 2900.65, GB 7000.1, GB 7000.5 and CJJ 45 apply to this standard.
3.1 LED module (LED module)
A combined illumination light source device. In addition to one or more light emitting diodes (LEDs), other components, such as optical, mechanical, electrical, and electronic components, may be included, but do not include control devices.
3.2 LED heat sink (LED heat-sink)
Light-emitting diodes (LEDs) are closest to the heat sink of the chip.
3.3 LED street light (LED street lamp)
A combined lighting fixture complying with the requirements of the standard, which is composed of a lamp housing, an LED module, an LED module control device, an optical component, and a mechanical component.
3.4 initial values (initial values)
The photoelectric parameter value measured by the LED street lamp when it is not aged and is ignited for 2 h under rated conditions.
3.5 Average correlated color temperature (average CCT)
The correlated color temperature measured by the LED street light after all the light emitted in all directions is mixed.
3.6 average color rendering index (average color rendering index)
The color rendering index measured by the LED street light after all the light emitted in all directions is mixed.
3.7 LED street lamp rated maximum temperature tc (rated maxium temperature of LED street lamp)
The maximum allowable temperature that may be generated on the outer surface of the heat sink of the LED street light (if marked, at the location indicated by the mark) during normal operation and at the maximum of the rated supply voltage or rated supply voltage range.
4 Product Categories
Classified according to the provisions of Chapter 4 of GB 7000.5-2005.
The above content is provided by WOSEN. WOSEN is a professional manufacturer and supplier of Led Flood Light, Led Street Light, Led Solar Light, etc. For more information, please visit https://www.wosenled.com/ or contact admin@wosenled.com or WhatsApp +86-13425434349
Mail an Lieferanten
Privacy statement: Your privacy is very important to Us. Our company promises not to disclose your personal information to any external company with out your explicit permission.
Fill in more information so that we can get in touch with you faster
Privacy statement: Your privacy is very important to Us. Our company promises not to disclose your personal information to any external company with out your explicit permission.